SIMONSWERK BANDTECHNIK

PRODUKTSELEKTOR

Telescope jig SIKU 3D K 3030, K 3130, K 3230, K 3330

for drilling of SIKU 3D K 3030, K 3130, K 3230, K 3330

Note

Fitting instructions

1. Adjust the end stops with regard to the upper hinge position. The jig can now be used for both right and left hand mounting.
2. Place door into frame and use spacer blocs to create clearance as per profile manufacturer's instructions.
3. Place telescopic serial drilling jig on the door leaf and adjust the outer drilling jigs so that the stops rest against the door at top and at the bottom (the middle drilling jig is centred automatically).
4. Clamp telescopic serial drilling jig in place and drill holes with Ø 5,0 mm drill bit.

 

Scope of supply

3 x drilling jigs
6 x eye bolts
1 x square rod with cable-pull action
2 x end stops
1 x drill bit Ø 5,0 mm
1 x Allen key 4 mm (blind plugs)
1 x fitting instruction

 

Note

Please indicate exact hinge type when ordering.
See also simultaneous mounting jig SIKU 3D.

Item versions

000-without

Telescope jig SIKU 3D K 3030, K 3130, K 3230, K 3330 for drilling of SIKU 3D K 3030, K 3130, K 3230, K 3330 - - Simonswerk GmbH
Packing unit
pack of 1
DIN
DIN right and left hand
Item No.
5 250910 0 00001
EAN
4015471034962

Advice

Downloads

Product information

Free software and download notes