TEG 310 2D 60
for flush glass doors













Product features
for flush glass doors
for 8-10 mm ESG-glass
without drilling the door leaf
for timber, steel or aluminium frames
continuous side adjustment (+ 3,0/- 2,0 mm)
continuous height adjustment with additional fine tune adjustment (+/- 1,0 mm)
maintenance-free slide bearings
rebate width 11-15 mm
Technical details
Attributes | Value | |
Load capacity | 60,0 kg | |
Overall length | 160,0 mm | |
Width (frame part) | 28,0 mm | |
Cutter diameter | 24,0 mm | |
Opening angle | 180° |
Suitable for
Types | Value |
Type of door leaf | glass |
Rebate | unrebated |
Type of frame | aluminium frame, blind frame, block frame, casing frame, steel frame |
Note
The load capacity mentioned above refers to the use of 2 hinges per door leaf (1 x 2 m), for detailed information please look at the chapter "technical information".
With an opening position of 180° the door may have to be fixed additionally.
Item versions
Satin Stainless Steel (040)

RAL 9016 Matte Traffic White (057)

Further model information
Advice
Downloads
Product information
CAD drawings
Descriptive text
SIMONSWERK TECTUS hinge TEG 310 2D 60 concealed for flush glass doors with timber, steel and aluminium frames and for 8 - 10 mm ESG-glass. With continuous 2D adjustment, load capacity up to 60 kg, opening angle up to 180°, overall length 160 mm, right hand and left hand applicable, maintenance-free slide bearings, two-dimensionally adjustable: side + 3,0 mm / - 2,0 mm, height +/- 1,0 mm. Can be combined on the lock side with handle KCH 1700, magnetic plate KCM 50/G as well as with timber, steel and aluminium frames with closing magnet KCM 50. Finish...